Din Rail LED AC 200-450V 0-100 0A Voltmeter Ammeter Display Active Power

Din rail LED AC 200-450V 0-100 0A voltmeter ammeter display active power

Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitions- opens in a new window or tab … Read moreabout the condition

Brand:
Unbranded/Generic

is_customized: Yes
Model:
T52

Accuracy Class: 1%+/-2 words
MPN:
Does Not Apply

Measuring Range: 200V-450V AC
Country/Region of Manufacture: China

Dimensions: 54*80*64
Display Type: Digital Only

Price :US $18.65
check for latest discount price from our store

Other Test Meters & Detectors

Description and Specification

Measure:
1. AC Voltage V
2. AC Current A
3. Active power W
4. Electric energy Kwh
5. Electric energy of cumulative time h
6. Power factor
7. Reset to zero. Press the SAM CK for 5 seconds, the Electric energy and Electric energy of cumulative time will reset to zero.

DIN rail multi function Digital meter can measure AC voltage, AC current, power factor, active power, electric energy and electric energy of cumulative time.
Technical Indicators
1. Accuracy: 1%±2 words
2.Display Mode: AC voltage and power factor use four red led of 0.31-inch
AC current and electric energy of cumulative time use five red led of 0.31-inch
Active power, electric energy use five green led of 0.31-inch
3.Range: AC voltage : AC 200-450V
AC 0.0-100.0A ( when measure signal lower than 100A, the accuracy is 0.01A, when measure
signal higher than 100A, the accuracy is 0.1A, the accuracy auto-change)
Active power: 0.0-30000W ( measure voltage AC 80.0 – 300.0V )
0.0-45000W ( measure voltage AC 200.0 – 450.0V )
Electric energy: 0.000-99999kwh
Electric energy of cumulative time: 0.00 – 999.59h
Power factor: 1.000-0.000
4.Speed: 2 times per second
5.Size: 54*80*64
6.Installation: Din-Rail
Application Method

1.Connect the measuring voltage to the 1 and 2 terminal.
2.Connections of meter with internal current transformer as graph 1. Make the wire through the hole in the meter and the direction chose arbitrarily.

3.When power on, the meter will display the measure result of the AC voltage (V), AC current (A) and active power (W)and the correlative red led will light up.

4.When press the button of SAM CK (on the right of meter) down, the meter will change to display the measure result of power factor (cosF), electric energy of cumulative time (h) and electric energy (kwh) and the correlative red led will light up.

5.When press the button of SAM CK down again, the meter will display the measure result of the AC voltage, AC current and active power.
6. When power off, the meter can save the value of electric energy and electric energy of cumulative time, and go on cumulating data when the meter power on again.
7.When the meter is displaying electric energy, you can press down the button of SAM CK last for five seconds, then the electric energy and electric energy of cumulative time will to be zero and start to cumulate when release the button.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>