ICSH014A LC100-A L-C Digital Inductance Capacitance Meter Precise

ICSH014A LC100-A L-C Digital Inductance Capacitance Meter Precise

Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitions- opens in a new window or tab … Read moreabout the condition

Brand:
Unbranded

MPN:
Does Not Apply

UPC:
Does Not Apply

Price :US $12.99
check for latest discount price from our store

Capacitance & ESR Meters

Description and Specification

Store Categories
ICSH014A LC100-A L/C Digital Inductance Capacitance Meter Precise

Item Description
ICSH014A LC100-A L/C Digital Inductance Capacitance Meter Precise

Features:
ICSH014A is a “Capacitance, Inductance Measuring” module.
Engaged in the development of electronic engineers often need to measure inductance and capacitance, and inductance capacitance meter sold on the market price is higher, and the measurement of small capacitance inductance and small error, this instrument based on LC resonant principle, join the accurate measurement of high-speed micro controller calculation, small capacitance can be measured the inductance 1uH and less than 1pF, the maximum this is also the characteristics of the instrument, particularly suitable for microwave production and switching power supply transformer, inductance measurement.

Four measured mode for ICSH014A (LC module) :
1.C mode…… Capacitance (0.01pF-10uF).
2.L mode…… Inductance (0.001uH-100mH).
3.HL mode…… Large inductance (0.001mH-100H)
4.HC mode…… Large capacitance (1uF-100mF)

All stalls are automatic range, the use is very convenient. In this way, ICSH014A Whether from the measurement range and measurement precision can completely replace any kind of inductance and capacitance measuring instrument on the market, the performance parameters to the digital bridge, is a highly cost-effective instrument.

The Technology Parameters:

Structure Introduction:
The overall effect diagram . When in use, you can use the Micro USB connection line is connected to the computer USB testing instrument power supply, if the user has a mobile phone charger with USB or with 5V power adapter with DC plug can also be directly to the instrument power supply. Special note: if you are using DC plug adapter, polar please hole positive confirmation, peripheral negative, while the Micro USB interface does not occur polarity error conditions.

Instrument structure:
The button has a total of 5, “Reset” to 0 “HC” button, large capacitance, inductance, select “HL” option, “L/C” and black expansion function button. The HC, HL and L/C selection is self lock , a press release was 1, 0, and X represents the arbitrary function, see the table below:

Usage:
1. Connecting computer USB as the tester and switch on the power supply.

2. According to the element to be tested for the selection of mode, to choose to measure inductance Lx, capacitance Cx, inductance or capacitance HC HL, in measuring terminal open state from the screen to see:
inductance: Measure Lx 0.000uH
The capacitive display: Measure Cx 0.00pF
Large inductance shows: Measure HL 0.000mH
Large capacitor shows: Measure HL 0.00uF

3. Because of the measurement principle of the HC file is different, first stated the following Lx, Cx and HL three mode of operation:
In the three mode , the measurements are required for zero adjustment. The methods according to different inductance, capacitance .
Cx mode in terminal open state, press “Reset” key, the screen shows “Setting… OK “after the release, the screen time line should display” 0.00pF “; HL and Lx mode, the terminal short-circuit condition, press” Reset “key, the screen shows” Setting… OK “after the release, the screen time should show” 0.000mH “and” 0.000uH “, after the open circuit terminal for display” Over Range!”. Then, you can put the inductance connected test instrument to test.
In the measuring result displayed, press the function keys are black, will display the test frequency current.

4. In the HC file, please make sure the capacitor is fully discharge to be measured, and then the red test clamp capacitor cathode, black test clamp capacitor anode, read the test results from the display screen and can, need to pay attention to is, the measurement of large capacity (more than 10mF), the test time can be more than 1 seconds, the test time of capacitor the longer the 100mF, about 7-8 seconds before the results.

Matters Attention:
1. HC mode measuring electrolytic capacitor, please note the polarity is negative, red black.
2. If the measurements before the display is 0, sometimes also need to zero adjustment, this might be the deviation is negative, but the display will not show negative.
3. Is strictly prohibited in the test terminal element when pressed zeroing button, this operation will lead to the erroneous results.
4. Is strictly prohibited without testing capacitor discharge, otherwise there may result in damage to the meter.
5. To use the 5V adapter module power supply, ensure that the polarity is negative “”, otherwise it will damage the module.

Hot Items
Payment
Shipping
Returns
About US
Contact Us
Payment
We Only Accept Paypal on Ebay. For specific requirements, please feel free to contact us.

Shipping
1)All orders are processed within 24 hours of payment on business days, and ship to your paypal address.
2)We have many shipping methods, The default one is Hongkong /Singapore Airmail (International shipping), To US customers, we will send the package via E-packet. If you have any need, please contact us.
3)Tax:We will do our best to help you to clear the goods, and the tax depends on each country custom.
4)The product in our store is free shipping but no tracking number. If you wanna have one, you can choose Standard Int’ shipping, we will arrange the shipment with a tracking number. Or you can place a order more than $40 , we will send the items to you with tracking number for free.
Returns
We will accept returns up to 60 days.
1)If you’re not satisfied with the products, please contact us, you can return the products to us in original package and we will refund your money after we get the package!(Shipping cost is NOT refundable and you should responsible for the return shipping)
2)Although we test each item and they are packed professionally, few item(less than 0.1%) might be damaged during the shipping. You are welcome to contact us within 3 days after you receive your package about replacement.
About Us
ICs_Processors_Store has been in business for more than 5 years now. We are attended to find popular items at unbeatable prices and pass them on to you the customer.
We have been doing this in wholesale for a few years before we decided to bring the deals directly to you!
Here is a list of reasons for trusting ICs_Processors_Store as your reliable source of products or business cooperator:
1.Competitive Price
2.High Quality Products
3.Excellent shopping platform
4.Excellent Customer Experience
5.Excellent Team Work
With our extremely fast processing and shipping and high superb customer service, we guaranty an excellent buying experience!
Contact Us
Email: Please contact us through the ebay message system. We will be sure to reply to your message in a timely manner.
Our Hours: Monday-Friday 9:00AM – 6:00PM

inkfrog terapeak

inkFrog Analytics

On Oct-07-16 at 10:00:18 PDT, seller added the following information:

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>